Define cable tray barriers - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)

You need to bulkload the Cable Tray Barrier Parts workbook delivered to [Product Folder]\CatalogData\BulkLoad\SampleDataFiles. You can also modify a relevant workbook to support barriers.

  1. Click Route Cableway .

  2. Click in the model to select a starting location for the cableway.

    The software displays the New Cableway Dialog Box.

  3. On the General tab, specify all the required properties.

    You must select a specification that supports barriers.

  4. Type a number in the Number of Barriers box. The default value is 0.

    The software adds a new tab to the dialog box called Barriers.

  5. On the Barriers tab, select the <CableWay Properties>, and make your changes.

  6. Repeat for each of the <CableWay Properties> that needs modifying.

  7. Click OK.

    The software adds a barrier by dividing the right-most partition into equal parts.

If you want all partitions to be equal, click Go to Defaults .

See Also

Modify cable tray barriers