Place an in-line can on cross bracing - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
12.1 (2019)
  1. Click Place Splits Command on the vertical toolbar.

  2. In the Place box, select By Object.

  3. In the Split Status box, select Split First.

  4. Select the cross brace to split.

  5. Click Accept .

  6. Select the other cross brace.

  7. Click Finish.

  8. Click Place Can Command to display the Place Can Ribbon.

  9. From the Catalog browser or from Can Type on the ribbon, select the in-line can rule to place from the Catalog.

    Select one of the Custom Inline Can types to change individual can parameters.

  10. Select the cross brace you selected in step 6 (the cross brace that you did not split) near the intersection of the two cross braces.

    The software prompts you to select the transverse members.

  11. Select the cross brace that you split (the cross brace you selected in step 4).

  12. Click Accept .

  13. If you are placing a Custom Inline Can type, change the diameter, thickness, computation method, factor, and cone parameters on the ribbon to meet your needs. If you are placing a predefined can from the Catalog, these settings are read-only.

  14. Click Finish.