Place a seam by table - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)
  1. Click Seam by Table on the vertical toolbar.

  2. Select the plate system for the seam.

  3. Click Landing Curve Table .

  4. Define the landing curve coordinates in the table. For more information about defining coordinates, see Landing Curve Table Dialog Box.

  5. Click Close.

  6. Click Boundaries .

  7. Define the seam boundaries using one or more of the following methods. If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting seam curves.

    Pick boundaries
    Define a boundary curve

  8. Click Accept .

  9. Select whether to place a design seam or a planning seam.

  10. If the boundary definition results in two solutions, pick the needed solution using the following procedure:

    Solve ambiguous solution created by selected boundaries

  11. Click Finish to place the seam.