The following advanced opening macros allow you to place triangular openings with two supports. The software positions a two-support opening by dimensions from the first support and centers the opening based on the second support and with respect to the local coordinate system.
2S Triangle H1xH2xR Creates a rounded triangular opening with two supports. You can define the height (H), the length of the triangle's Support 1 side (H1), and three radii (R1, R2, and R3). |
|
2S Triangle 500x1000x30 Creates a rounded triangular opening with two supports. The height is fixed at 500 mm, the length is fixed at 1000 mm, and the radii are fixed at 30 degrees. |
|
2S Triangle 1000x2000x100x10 Creates a rounded triangular opening with two supports. The height is fixed at 1000 mm, the length is fixed at 2000 mm, and the radii are fixed at 10 degrees. |