Gap detected in the seam bounding. - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
12.1 (2019)


A gap exists between a seam landing curve and one of its boundaries.

Possible Cause

  1. A sketched seam does not intersect its boundary.

  2. The seam is out-of-date.

What You Should Do

Separately try each of the following steps:

  1. Select the row in the Results dialog box. The beginning of the gap is shown in the graphic view with this icon: .

  2. Open the seam in Sketch 2D and verify that the seam landing curve extended past its boundaries.

  3. Click Recompute in the Results dialog box to recalculate the seam.