Define Port Alignment - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. In the tree view, click Piping > Piping Specification > Model Rules > Port Alignment Rule.

  2. Click Insert Row to insert a blank row in the grid view.

  3. Define the nominal piping diameter range for the port alignment that you are defining.

  4. In the End Preparation column, type the end preparation code for the port alignment.

  5. In the Method of Trimming column, enter the code for the method of trimming.

  6. In the Acceptable Alignment Tolerance column, specify the maximum angular variation between the branch centerline and the header centerline.

  • Valid end preparation codes are listed in the End Preparation select list.

  • Valid trimming method codes are listed in the Methods of Trimming select list.

  • For more information about port alignment property that you can define, see Port Alignment.

  • The Port Alignment sheet in the Piping Specification.xls workbook corresponds to the Port Alignment Rule node. For more information about the Piping workbooks delivered with the software, see Piping Reference Data.