Bolt Diameter Equivalence Rule - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)

The Bolt Diameter Equivalence Rule node (the BoltDiameterEquivalenceRule sheet in the Bolt Diameter Equivalence.xls workbook) is an optional rule that you can use to define a correlation between ASME bolt diameters and ISO bolt diameters. This rule is only intended to be used in determining an equivalent bolt diameter for reporting purposes. The delivered sample data represents a correlation between ASME bolt diameters and ISO bolt diameters from ½ inch to 2 inches.

This rule is used when you enable the Bolt Diameter Equivalence Option in Model Options (on the DefaultProjectOptions sheet) in the Piping Specification.xls workbook.

Bolt Diameter In Primary Units (Required)

Specifies the bolt diameter in the first unit of measurement.

Bolt Diameter In Secondary Units (Required)

Specifies the bolt diameter in the second unit of measurement to equate to the primary unit of measurement.

Primary Units of Measure (Required)

Specifies the unit of measurement, in or mm for example, for the values in the Bolt Diameter Primary Units column.

Secondary Units of Measure (Required)

Specifies the unit of measurement, in or mm for example, for the values in the Bolt Diameter Secondary Units column.

See Also

Piping Specification Rules
Bolt Length Calculations
Bolt Diameter Equivalence Rule
Bolt Extension
Bolt Selection Filter
Bolt Selection Filter for Nozzles
Machine Bolt Length Calculation Tolerance
Preferred Machine Bolt Length
Preferred Stud Bolt Length
Stud Bolt Length Calculation Tolerance
Specify Bolt Diameter Equivalences