Rectangle Opening - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

The Rectangle Opening node (sheet in the StructOpeningsMetric.xls workbook) defines rectangular openings that you can place in the model.

Part Number

Enter a part number for the opening. This identification must be unique across the entire catalog.

Part Description

Enter a description for the opening.

Section Name

Specify a section name for the opening. This name must be unique within the section standard.

Area

Enter the opening area. Be sure to include the unit of measurement when defining this value.

Perimeter

Enter the total distance around the perimeter of the opening. Be sure to include the unit of measurement when defining this value.

Custom

Specifies if the opening can be changed. Enter 1 if the opening can be changed. Enter 0 if the opening cannot be changed.

Symbol Definition

Enter the symbol used to define the opening.

Length

Enter the opening length. This is the shorter side.

Width

Enter the opening width. This is the longer side.

Fillet

Enter the fillet radius at the corners of the opening.

See Also

Oval Opening
Square Opening
Triangle Opening