Add to Valve - PDS - Help

Plant Design System (PDS) Piping Design Graphics (PD_Design)

3D Design and Visualization

This command activates the Add Valve Appurtenance form which is used to define a Floor Stand or Extension Stem for a specified valve. When you specify the option (Floor Stand or Extension Stem) and the dimensions, the system revises the valve with the additional graphics and data. Extension stem will delete a chain wheel operator.

  1. Identify Valve by placing a data point over the center of the valve to be revised and accept the selection by pressing a <D>.

  2. Select Valve Appurtenance by selecting the option to be added to the valve.

  3. Accept or Select Valve Appurtenance by selecting Confirm to confirm the selected option.

  4. Specify Dimensions for Floor Stand/Extension Stem by typing the dimensions for the valve appurtenance as illustrated on the form.