Cableway Specifications - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Electrical Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

The Cable Way Specifications node (the Cableway Spec sheet in the CableWay.xls workbook) determines the specification that you access when you route a new run of cableway or create cableway features such as transitions and turns.

Default Bend Radius

Specifies the default for the throat radius width. Example values for bend radii are 12in, 24in, and 36in.

Description

Specifies a phrase that describes the cableway specification. For example, you can explain the purpose of this particular specification.

Fitting to Fitting Connection Part #X Component Class

Leave undefined.

Fitting to Fitting Connection Part #X Component Type

Leave undefined.

Fitting to Fitting Connection Part #X Quantity

Leave set to 0.

Tray Specification Type

Indicates if the specification applies to cable trays, cableways, or duct banks. "1" represents Cableway, "2" represents Cable tray, and "3" represents Duct Bank. Valid codes are listed in the AllCodeLists.xls workbook on the TraySpecificationType sheet in the Codelist Number column.

Load Span Classification

Leave undefined.

Load Span Classification Practice

Leave undefined.

Manufacturer

Specify the manufacturer of the material in the reserved cableway space. This property is used to track the manufacturer for reporting. Valid codes are listed in the AllCodeLists.xls workbook on the Manufacturer sheet in the Codelist Number column.

Material

Specifies the material that will reside in the reserved cableway space.

Preferred Connection Gap

Leave set to 0.

Rung Spacing

Leave set to 0.

Spec Name

Specifies the name assigned to the cableway specification.

Tray to Fitting Connection Part #X Component Class

Leave undefined.

Tray to Fitting Connection Part #X Component Type

Leave undefined.

Tray to Fitting Connection Part #X Quantity

Leave set to 0.

Tray to Tray Connection Part #X Component Class

Leave undefined.

Tray to Tray Connection Part #X Component Type

Leave undefined.

Tray to Tray Connection Part #X Quantity

Leave set to 0.

Tray Length

Leave set to 0.

Tray Type

Leave undefined.

See Also

Define Cableway Specifications