Specify Component Tag Dialog Box - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Allows you to specify the component that you want to use by the component tag. You activate this dialog box by selecting the Insert Component command, and then selecting <Specify Component Tag> from the Type option.

Source for Tags

Specifies the location of component tags in the Component Tag drop-down list.

  • Catalog - Select this option to show components in the Catalog.

  • Design Basis - Select this option to show components in the referenced Design Basis.

Honor Specification

Select this option to show components that are only valid for the piping material class that the selected pipe is assigned.

Component tag

Displays a list of available tag numbers of components based on the pipe geometry and, if applicable, the pipe specification and schedule, at the insertion location. Select the tag of the component that you want to insert. Select Browse Instruments to place an instrument. Select Browse Piping Specialties to place a piping specialty item. You can also specify the name of an instrument that was retrieved from SmartPlant Electrical.