Displays the name of the instrument.
Displays the pipe bend angle for the instrument. For example, 90 deg.
Displays the pipe bend radius for the instrument.
Face To Face Dimension
Displays the distance between port1 face to port2 face.
Heat Tracing Requirement
Displays whether the piping component is heat-traced.
Tracing Max Temperature
Displays the maximum heat-tracing temperature of the piping component.
Inspection ISO ID
Displays the inspection ISO ID of the piping component in the reference model.
Displays whether the piping component is insulated.
Insulation Purpose 1
Displays the purpose of insulation. The software reads the purpose from the insulation specification from the reference data and displays it here.
Insulation Purpose 2
Displays the material of the insulation. The software reads the material from the insulation specification from the reference data and displays it here.
Insulation Purpose 3
Displays the thickness of the insulation. The software reads the thickness from the insulation specification from the reference data and displays it here.
Displays the maximum operating temperature of the piping component.
Schedule or Thickness
Displays the schedule thickness short description or code for the piping component.
Schedule Thickness 2
Displays the component's outer diameter for the piping port in units of measure, such as mm (millimeters) or in (inches).
Displays the nominal diameter (NPD) of the piping component feature. The piping component feature is inherited from the pipe run which the component feature belongs.
Piping Model Code
Displays the piping model code for Smart 3D.
Piping Component Type 1
Displays the commodity type short code for the piping component.
Piping Component Type 2
Piping Commodity Option 1
Displays short code for the primary commodity object from the piping job specification.
Piping Commodity Option 2
Displays short code for the secondary commodity object from the piping job specification.
Commodity Specialty Type
Valve Operator Type
Displays the code that represents the type of valve operator, actuator, or appurtenance used in the model.
Geometric Industry Practice
Displays the source industry standard used in the preparation of the pipe catalog data.
Geometric Industry Standard
Displays the name of the source, either an industry standard or a manufacturer, used in the preparation of the catalog data applicable to the piping component.
Valve Operator Class
Displays the valve operator class used by the piping instrument.
Displays the maximum operating pressure of the piping instrument.
Displays a list of options that you can use instead of the selected object. If no options exist, this field just displays Default. The Option list contains any options defined in the piping specification for the short code selected in the Type list. For example, if you are looking at a valve part, the Option list contains other valve parts, such as one with a higher-pressure rating, that you can use here.
Displays the name of the penetrating spool.
Displays the object's short code. The short code is based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location.
Displays the commodity code for the penetrating spool.
Displays the short code for the piping instrument.
Piping Component Type 3
Dry Installed Weight
Displays the dry weight of the piping component.
Displays whether the pipe requires fabrication.
Displays the fabrication code for the piping component.
Displays the construction status of the piping component placed in the model. The default construction status is New.
Construction Status 2
MTO Reporting Requirements
Displays the reporting requirements for the object, whether the object is reported or not reported.
MTO Reporting Type
Displays the reporting type. The reporting type displayed depends on the Reporting Requirement you choose.
Catalog Part Number
Displays the catalog part number associated with the reference 3D instrument.
Displays the layer name on which the piping component is contained.
Source object type
Displays the name of the type of object.