DIN Wall Thickness Data - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

The DIN Wall Thickness Data node (the DINWallThicknessData sheet in the AllCommon.xls workbook) defines the generic wall thickness data for the DIN industry standard.

First Size (Required)

Enter the first size of the piping commodity.

First Size Units (Required)

Enter the units, mm or in for example, for the value you entered in the First Size column.

First Size Schedule (Required)

Select the DIN wall thickness Reihe number of the first size end.

First Size Schedule Practice (Required)

Select Germany Standards (DIN).

Geometric Industry Standard (Required)

Select the DIN standard that represents the wall thickness data.

Geometric Industry Practice (Required)

Select DIN.

Multi-Size Option (Conditionally Required)

Type a string to represent an optional piping commodity selection for multi-sized fittings when the first size and second size are inadequate.

For example, if two additional sizes (50mm and 25mm) are required in addition to a first size of 150mm and a second size of 100mm, the string that would represent the sizes would be 150x100x50x25. The software interprets the string to determine the second size, the number of sizes in addition to the first size and second size, and the units of measure for each size. The unit of measure for the first size, defined in the First Size Units column, is used for the string.

Reinforced Wall Thickness for Port X (Conditionally Required)

Enter the inner wall thickness for each end of the piping commodity, piping specialty, or instrument. Dimensioned as B in the picture.

Second Size (Conditionally Required)

Enter the second size of the piping commodity.

Second Size Units (Required)

Enter the units, mm or in for example, for the value you entered in the Second Size column.

Second Size Schedule (Conditionally Required)

Select the DIN wall thickness Reihe number of the second size end.

Second Size Schedule Practice (Conditionally Required)

Select Germany Standards (DIN).

Wall Thickness for Port X (Required)

Enter the outer wall thickness for each end of the piping commodity, piping specialty, or instrument. Dimensioned as A in the picture.