Piping Reference Data - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

Before working with piping reference data, you must be familiar with how the software handles reference data in general. If you have not already done so, read and understand the following important concepts and procedures described in the Intergraph Smart 3D Reference Data Guide:

  • Custom attributes

  • Symbol creation

  • Codelists (also referred to as "select lists")

  • Naming rules

  • Bulkloading

For example, before you can define pipe parts, you must understand how part data relates to data on the custom interfaces sheet, and how that information relates to parameters defined when the part symbol is created.

Piping Workbooks

The piping reference data is defined in multiple Microsoft Excel workbooks so that you can bulkload only what you need. The software delivers these workbooks to the [Product Folder]\CatalogData\Bulkload\Datafiles folder. The complete list of available piping specifications delivered with the software is in Appendix: Delivered Pipe Specifications.

The following piping reference data workbooks are delivered in [Product Folder]\CatalogData\Bulkload\Datafiles folder:

Piping Specification.xls
Piping Catalog.xls
Piping Specialty Data.xls
Piping.xls
Instrument Data.xls
On-the-fly Instruments.xls
On-the-fly Piping Specialties.xls
Ten_Specs_CatalogData.xls
Ten_Specs_SpecificationData.xls

Additional piping reference data workbooks are available on the Customer Support web site.

Because bulkloading all of these specifications would create a very large catalog, a subset of ten specifications is used to create the catalogdb.dat file that is delivered with the software. This subset of ten specifications is delivered in the Ten_Specs_SpecificationData.xls and Ten_Specs_CatalogData.xls workbooks and is listed below.

Specification Name

Materials Description

Fluid Service

1C0031

CL150 RFFE, CS, Trim 8, CA 0.063, Process, hot (-20 to 800 degF)

Process

1S3977

CL150 RFFE, 304/CS Valves, Trim 8

Lube and seal oil

1S3984

CL150 RFFE, 304/316 Valves, Trim 12

Process

2C0032

CL300 RFFE, CS, Trim 8, CA 0.063, Process, hot (-20 to 800 degF)

Process

2L1670

CL300 RFFE, 1.25Cr-0.5Mo, 316 Trim, MJ, other

Catalyst lift lines

2S3985

CL300 RFFE, 304/316 Valves, Trim 12

Process

4C0033

CL600 RFFE, CS, Trim 8, CA 0.063, Process, hot (-20 to 800 degF)

Process

5C0390

CL900 BE/RFFE, CS, Trim 5, (ASME-I)

Low pressure CL150 steam

6C0391

CL1500 BE/RJFE, CS, Trim 5, (ASME-I)

Low pressure CL150 steam

AC0014

CL125 FFFE, CS, Bronze Trim

Cooling water

The Piping.xls workbook contains four example pipe specifications (N0, N1, 1C0100, and 1C0101) that Hexagon PPM uses for testing purposes. These four example pipe specifications are also available in the delivered Catalog template file.

Specification Name

Materials Description

Fluid Service

N0

CL150, Carbon Steel, RFFE, Trim 8, < 50mm SWE, >= 50mm BE

Piping Spec N0 Service

N1

CL300, Carbon Steel, RFFE, Trim 8, < 50mm SWE, >= 50mm BE

Piping Spec N1 Service

1C0100

CL150 RFFE, CS, PTFE Lined, Std Trim, Flanged Pipe and Fittings

ASME Class 150 Process

1C0101

CL150 RFFE, CS, PTFE Lined, Std Trim, Flanged Pipe and Fittings

ASME Class 150 Process

Catalog Task

Instead of defining your piping reference data in workbooks and then bulkloading the workbooks to the Catalog, you can define your piping specification data interactively in the Catalog task. For more information on how to define and verify your piping reference data in the Catalog task, refer to the Catalog User's Guide or the Catalog Help.

See Also

Piping Rules
Commodity Codes
Instruments
Pipe Specification
Piping Parts
Piping Reference Data Workflow