These properties define the shape and structure of the shoe body.
IJUAhsShoeShape::ShoeShape
Specifies shape of the shoe to be used. Enter shoe name associated to a certain shoe in the shoe shape table. For more information on Shoe shape details, see Shoe Shape
IJOAhsShoeHeight::ShoeHeight
Defines the height of the shoe from the bottom of the pipe to the bottom of the shoe, including all plates, guides, pads, and so on. When ShoeHeight is not set to any value, the shoe height is calculated by combining all the specified shapes. When set to zero, this value is ignored.
IJUAhsShoeWidth::ShoeWidth - (Override Property)
Defines the width of the shoe which overrides already defined ShoeShape Width.
IJUAhsShoeLength::ShoeLength - (Override Property)
Defines the length of the shoe which overrides already defined ShoeShape Length.
IJOAhsShoeGap::ShoeGap
Specifies distance between the pipe surface and the shoe top edge. This value must be greater than or equal to zero. Also, ShoeGap must be less than the ShoeHeight.
IJOAhsDiamter1::Diamter1
Defines the nominal diameter of the pipe.
IJOAhsSlopeAngle::SlopeAngle
Specifies slope angle of the pipe supported by the shoe. SlopeAngle overrides the shoe angle specified in the shoe shape xls.
IJUAhsShoeQty::ShoeQty
Specifies the number of shoe shapes and the location of the shoe.
If ShoeQty is
-
1 – Bottom
-
2 – Bottom, Top
-
3 – Bottom, Left, Right
-
4 – Bottom, top, Right, Left
IJOAhsInsulationTh::InsulationTh
Specifies the insulation thickness.
IJOAhsInsulationL::InsulationLength
Specifies the length of the insulation.