Part Selection Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

These properties are used for the part selection rule. They are not used for creating graphics. You must enter the values when the part needs to be selected by the part selection rule.

For these properties, the default unit of distance is mm. Specify in at the end of the dimensional value to use inches (for example 10in).

IJUAhsRodDiameter::RodDiameter

Specifies the outside diameter of rod fittings that attach to the welded beam attachment. This value is used by part selection rules for choosing the correct welded beam attachment part.

IJUAhsSize::Size

Specifies the size of the strut for the part selection rule. This property is optional. The value is used only when the part selection rule is not based on the rod diameter, for example, struts or restraint end connections.