IJUAhsDiameter1::Diameter1
Specifies the pipe diameter.
IJUAhsSize::Size (Optional)
This value is only used by the Part Selection rule for choosing a Yoke Clamp part. It is not included in the yoke clamp’s graphics.
IJUAhsPinOrLug::PinOrLug
Specifies whether the connection type is a lug or a pin.
This property uses the codelist number defined in the hsPinOrLug sheet in the HS_S3DParts_Codelist.xls.
1 - Pin
2 - Lug
3 - Top Block
IJUAhsOrientation::Orientation
Specifies how the connection type is oriented with respect to the pipe. This is applicable to both pin and lug top types.
This property uses the codelist number defined in the hsOrientation sheet in the HS_S3DParts_Codelist.xls.
IJUAhsRodTakeOut::RodTakeOut
Specifies the distance from the pipe centerline to the pin or lug centerline. This value is always greater than 0.5 times the Diameter1 plus 0.5 times the Pin1Diameter.