SMS_NestData - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Manufacturing Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

Adds NestingData attributes to the SMS_PART_INFO element. The software creates the SMS_NESTDATA node is cr SMS_PART_INFO, and exports the attributes. The INTERFACE attribute describes the attributes to report.

NAME

Adds any attribute that the INTERFACE attribute describes:

  • SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER

  • SMS_PART_INFO||SMS_NESTDATA||LOT_DATE

ACTION

Action

Description

NESTING_DATA

Uses NestingData to get attributes.

INTERFACE

Format

Description

Interface::Attribute

Gets the attribute value from the interface on the assembly or block. If the attribute value is a codelist, the software displays the short description.

VALUE

Specifies an optional default value of your choice. Smart 3D uses this value if an error occurs while retrieving the value from the INTERFACE attribute. If this attribute is not used, then the system uses “” as the default value.

Smart 3D ignores all other attributes.

Examples

< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::LotNumber"/>

-OR-

< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::LotNumber" VALUE=”NULL”/>

< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||NESTING_DATE ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::NestingTimestamp"/>

-OR-

< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||NESTING_DATE ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::NestingTimestamp" VALUE="NULL"/>

Sample Output

The sample was generated for the SMS_NESTDATA:

Example with BuiltUp: SMS_NESTDATA is created for each Web and Top Flange