Draw a Line with FreeSketch - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
11.x(2016)
  1. On the Draw toolbar, click FreeSketch .

  2. On the ribbon, set the Line element type and clear the other element type buttons.

  3. Drag to draw a line or a series of connected lines.

  • Adjust allows the software to adjust the geometry that you draw.

  • When Adjust is off, the software interprets the exact movements of your pointer.

  • When Adjust is on, the software interprets the lines as horizontal or vertical when you finish drawing. If Maintain Relationships is set, the software places relationship handles.

  • The software recognizes relationships at the start point and end point of the line. If Maintain Relationships is set, the software places relationship handles.

  • When you set the Line and Arc element types, you can draw connected lines and arcs.

  • You can use the options on the ribbon and the commands on the shortcut menu to edit a line.

See Also

FreeSketch Command
Drawing FreeForm Shapes
FreeSketch Ribbon