PinPoint Command - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Intergraph Smart 3D
Reference Data
11 (2016)

 Helps you draw elements with precision by displaying coordinate data at the pointer. The displayed coordinates are relative to a target position that you set and can reset at any time.

Using PinPoint, you can draw elements at known locations on the drawing sheet, draw elements known distances apart, and so forth. You can use PinPoint with all drawing commands.

You cannot place elements with PinPoint on the Main toolbar if you are using Grid Snap.

See Also

Re-Orient PinPoint
Reposition the PinPoint Target Point
Draw with PinPoint
PinPoint Ribbon