Sketch and Constrain Offset Curve - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

These steps are only required for a collar connected to the base plane.

  1. Sketch the collar on the Default layer.

  2. Click Offset on the Change toolbar.

  3. Select the base plane curve.

  4. Drag the offset curve above the base plane curve, and click to place the curve.

  5. Type a value in the Step distance box to offset the curve so that it is visible above the base plane curve.

    This gap accounts for fit up clearance

  6. Sketch the sides and top of the collar. For more information, see Sketch and Constrain Collar Geometry.

  7. Extend the sides of the collar to the offset curve using the Extend to Next command.

  8. Click Trim > Custom Curve Trim on the Draw toolbar to trim the offset curve to the sides of the collar.

    Do not use Trim to trim the offset curve.