Name Slot Edges - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)
  1. On the Penetration Symbols toolbar, click Name Slot Geometry .

    The Name Geometry dialog box displays. By default, Representation Geometry Only is selected, so only geometry in the Slot and SlotProfileSketchCurve representations is shown.

  2. In the Attribute name box, choose EdgeName.

  3. In the Geometry Type column, select a geometry type in the table. The corresponding graphical line highlights in the symbol.

    If you have already created a profile sketch representation, be careful to select Slot geometry, and not SlotProfileSketchCurve geometry.

  4. In the Edge Name box, type the appropriate edge name text. In this example, the top of the slot is chosen to correspond with the name Top.

  5. Click Apply.

  6. Repeat until all edges of the slot are named.

  7. Click OK.

    All edges must be named according to the naming conventions. For more information, see Edge Names.

    Check that profile edge names were properly copied in with the profile geometry. Clear Representation Geometry Only in the Name Geometry dialog box to see all edge names. Add edge names if needed.