Sketch and Constrain Sketched Feature Construction Elements - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
11.x(2016)

Construction elements are used to aid in the definition and proper constraint of the final symbol geometry. Because of the way sketched features are placed into a Draft 2D view, sketched feature symbols can be constrained using horizontal and vertical constraints.

  1. Make the Constructions Layer active.

  2. Place a point at the (0,0) origin of the 2D Symbols file, and then click Lock on the Relationship toolbar to lock the point.

  3. Define the necessary horizontal and vertical construction lines relative to the symbol origin.

  4. Define and constrain additional construction elements (lines, circles, and so forth) as needed.

  5. Make the Dimension Layer active.

  6. Dimension the construction elements to further constrain and aid in the definition of the geometry.

  7. Click a dimension in the graphics view, and type the new dimension value to adjust.