Create a new pipe run - Intergraph Smart 3D - Administration

Click Route Pipe on the vertical toolbar.

Select the run starting point.

• If you select an equipment nozzle, a point in space, a tap, a branch port, or a point along a straight feature, the software prompts you to create a new pipe run.

• If you select a feature located at the end of an existing run, the software continues the run of the selected feature. Skip to step 5.

• If you select an equipment nozzle that is correlated with P&ID design basis data, the software automatically determines which run should be connected.

On the New Pipe Run dialog box, type a name for the Pipe Run. If you do not type a name, the software automatically generates a name.

Select pipe run settings

Click OK to close the New Pipe Run dialog box.

Select points to define the route of your pipe run.

You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators when defining your pipe run.

Select the ending point of the pipe leg. Right-click to end routing the pipe run.