Sloping Pipeline Indication Method (OS 19) - Isogen - Reference

Isogen Option Switches Reference

PPMProductFamily
Procurement, Fabrication, and Construction
PPMProduct
Isogen
PPMCategory
Reference
Version_ISOGEN
13.0(2016)

The following example shows how a falling pipeline is indicated on the isometric drawing. The default setting of 0 shows the fall angle in degrees.

You can use setting values 1 through 5 to display the fall in alternative ways. A value of 6, however, suppresses the fall indication altogether, as shown in the following example:

See Also

Option Switch 19: Sloping Pipeline (Indication Method)