Option Switch 23: Material List (Controls/File Type) - Isogen - Reference

Isogen Option Switches Reference

PPMProductFamily
Procurement, Fabrication, and Construction
PPMProduct
Isogen
PPMCategory
Reference
Version_ISOGEN
13.0(2016)

Controls the following integral material list functions on the isometric drawing:

  • Material list on/off

  • Special type of list

  • Material list style

  • Material control file type

  • Continuous or sectionalized material list

If you do not require a material list or obtain the material list by alternative means, such as by printing it, you can suppress its output.

Switch Settings

The following settings are available for Option Switch 23:

SWITCH POSITION 1 - Material List On/Off

0

Plot the material list integrally with the isometric drawing.

1

Suppress plotting of the material list.

SWITCH POSITION 2 - Special Type Material Lists

0

Suppress special type of material list. This is the default setting.

1

Use special type of material list. Every item is given a separate entry, except gaskets and bolts which are accumulated. Pulled bends have a "U" prefix, and welds have a "W" or "B" prefix.

2

Suppress special type of material list. Use an alpha system of material list pointers (A, B, C, and so on) instead of the default numeric system.

SWITCH POSITION 3 - Material List Style

0 or 1

Use Style 1 material list. This is the default setting.

2

Use Style 2 material list.

3

Use Style 3 material list.

4

Use Style 4 material list.

SWITCH POSITION 4 - Type of Material Control File

0

Use the standard material control file. This is the default setting.

1

Use the user-defined material control file.

SWITCH POSITION 5 - Style 2 Material List Layout Pattern

This position is similar to setting Option Switch 23 Position 2 to 1.

0

Use the standard sectionalized layout. This type of list has group headings and component sub-group headings.

1

Use the continuous style layout without headings and sub-headings. This type of list is partitioned between the logical groups, such as PIPE, FLANGES, FITTINGS, and so on.

2

Use the standard sectionalized layout without dividing lines.

Switch Layout

Related Program Development Specifications

Version

Date

Introduced

1.0.0

APR 1983

Dev. No. 56 - User Defined Material List

7.0.0

OCT 1993

Dev. No. 65N – Alphabetic Material List Identifiers

7.4.0

DEC 1995

Dev. No. 67A – Style 4 Material List

7.6.0

MAY 1996

Related Option Switches

N/A

Option Switch Detail Sketch

Material List - Controls & M/C File Type (OS 23)