-
Click Stiffener Profile System by Offset Command to display the Stiffener Profile System by Offset Ribbon.
-
Select the plate system to stiffen.
-
Select the Section Type and Section Size.
-
Click Base Curve Definition .
-
Select a base curve (grid plane) that intersects the plate system that you selected. This is the curve to offset from.
-
Click Offset Curve Definition .
-
Define the offset from the base curve.
-
Click Profile Orientation Definition .
-
Define the orientation of the profile system cross-section.
-
Click Boundary Definition .
-
Define the boundaries for the stiffener profile.
-
Click Accept .
-
If the boundary definition results in two solutions, pick the needed solution using the following procedure:
-
Click Finish.
Stiffener profiles are always associated with the plate system to which they belong.