S3DGeniEExportMapping.xls - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)

This workbook contains mapping for both neutral schema and GeniE export. That is, it contains all the sheets of the ExportAttributeMapping.xls workbook and the mapping sheets needed for GeniE export. In the existing sample mapping sheets, you can add new mapping entries.

Worksheets

Index

Provides an index of all the other sheets in the workbook. It describes all other sheets in the workbook.

GeniEMap

Provides the main mapping sheet for GeniE mapping. This sheet in turn refers to the other GeniE mapping sheets.

GeniEClassMap

Maps the supported structure classes between Smart 3D and GeniE export. This is the main mapping sheet for the GeniE translation.

GeniEGlobalsMap

Defines global settings for data export to GeniE Schema.

StraightMemSystemAttrsMap

Maps the straight member system attributes and interfaces between the neutral and GeniE schemas.

CurvedMemSystemAttrsMap

Maps the curved member system attributes and interfaces between the neutral and GeniE schemas.

StraightMemPartAttrsMap

Maps the straight member part attributes and interfaces between the neutral and GeniE schemas.

CurvedMemPartAttrsMap

Maps the curved member part attributes and interfaces between the neutral and GeniE schemas.

StraightStiffenerSysAttrsMap

Maps the straight stiffener system attributes and interfaces between the neutral and GeniE schemas.

CurvedStiffenerSysAttrsMap

Maps the curved stiffener system attributes and interfaces between the neutral and GeniE schemas.

StraightERSysAttrsMap

Maps the straight edge reinforcement system attributes and interfaces between the neutral and GeniE schemas.

CurvedERSysAttrsMap

Maps the curved edge reinforcement system attributes and interfaces between the neutral and GeniE schemas.

BeamSysAttrsMap

Maps the beam system attributes and interfaces between the neutral and GeniE schemas.

MaterialMap

Maps the material attributes and interfaces between the neutral and GeniE schemas.

ApplicationDetailsMap

Maps the application details between the neutral and the GeniE schemas.

UnitsNameMap

Maps the unit names and interfaces between the neutral and GeniE schemas.

UnitsMap

Maps the unit attributes and interfaces between the neutral and GeniE schemas.

FlatBarXSectionMap

Maps the flat bar cross-section attributes and interfaces between the neutral and GeniE schemas.

AngleXSectionMap

Maps the angle cross-section attributes and interfaces between the neutral and GeniE schemas.

GeneralXSectionMap

Maps the generic cross-section attributes and interfaces between Neutral and GeniE Schema.

IXSectionMap

Maps the I-cross-section attributes and interfaces between the neutral and GeniE schemas.

ChannelXSectionMap

Maps the channel cross-section attributes and interfaces between the neutral and GeniE schemas.

TubeXSectionMap

Maps the tubular cross- section attributes and interfaces between the neutral and GeniE schemas.

BoxXSectionMap

Maps the box cross-section attributes and interfaces between the neutral and GeniE schemas.

XSectionAdditionalAttrMap

Maps the cross-sectional additional attributes and interfaces between the neutral and GeniE schemas.

SlabAttrsMap

Maps the slab attributes and interfaces between the neutral and GeniE schemas.

FlatPlateSysAttrsMap

Maps the flat plate system attributes and interfaces between the neutral and GeniE schemas.

CurvedPlateSysAttrsMap

Maps the curved plate system attributes and interfaces between the neutral and GeniE schemas.

EquipmentAttrsMap

Maps the equipment attributes and interfaces between the neutral and GeniE schemas.

EqpFoundationAttrsMap

Maps the equipment foundation attributes and interfaces between the neutral and GeniE schemas.

FootingAttrsMap

Maps the footing attributes and interfaces between the neutral and GeniE schemas.

StairAttrsMap

Maps the stair attributes and interfaces between the neutral and GeniE schemas.

LadderAttrsMap

Maps the ladder attributes and interfaces between the neutral and GeniE schemas.

HandRailAttrsMap

Maps the hand rail attributes and interfaces between the neutral and GeniE schemas.

LoadCaseAttrMap

Maps the load case attributes and interfaces between the neutral and GeniE schemas.

LoadCombinationAttrMap

Maps the load combination attributes and interfaces between the neutral and GeniE schemas.

PointLoadAttrMap

Maps the point load attributes and interfaces between the neutral and GeniE schemas.

UDLAttrMap

Maps the UDL load attributes and interfaces between the neutral and GeniE schemas.

Mapping Sheets Column Description

Source Attribute

Defines the neutral schema attribute to be mapped.

Target Attribute

Defines the GeniE schema attribute to which the neutral schema attribute value is mapped.

MapType

Defines the map type of the attribute. Acceptable values are as follows:

  • NameDef - Used when the value needs to be directly transferred. For example, there is an attribute named Name in the source system and same attribute named name in the target system. Because both attributes have the same meaning, the value just needs to be transferred between the two systems. By default, if no MapType is specified, NameDef is used.

  • ValueDef - Used when the value of an attribute needs to be mapped before it is transferred.

  • AdditionalAttributeDef - Used when it is necessary to create new or additional attributes for the value of a given attribute.

  • PatternDef – Used when any valid regular expression can be used to map the values.

  • CharacterDef - Used to split the value of an attribute using a delimiter or character position and string length to generate new attributes.

SheetName

Defines the name of the sheet in the ExportAttributeMapping.xls workbook that contains additional mapping information related to the attribute, if any exists.

Formula

Defines the formula used to calculate the value of the attribute to mapped, if one is needed. For example, if the source system has an attribute Radius that needs to be mapped to the destination system's attribute Diameter, the software cannot substitute one value for the other. Instead the value used for Diameter would result from the following calculation: Diameter = 2 * Radius.

Value

Specifies the value of the neutral schema attribute.

Label

Specifies whether the Smart 3D attribute is a label. Type TRUE/YES or FALSE/NO. Entries can be in lowercase or uppercase.

Ignore

Specifies whether the item is ignored during export. Type TRUE/YES or FALSE/NO. Entries can be in lowercase or uppercase.

Hierarchical Mapping

The S3DGeniEExportMapping.xls workbook also supports hierarchical mapping between source and target systems. For example, if the source object has an attribute called COG on Equipment using the following hierarchy:

EquipmentProperties.Physical.DryCoG.Point3D.X

And if the above hierarchy is matched with cog.x on the target system, then you can directly map this hierarchy in the Source Attribute and Target Attribute columns.

This hierarchical mapping is applicable until a child item is a direct attribute on its parent.