Place an end can - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)

Show me

  1. Click Place Can on the vertical ribbon.

  2. From the Catalog browser or from Can Type on the ribbon, select the end can rule to place from the Catalog.

    Select one of the Custom End Can types to change individual can parameters.

  3. Select the unsupported frame connection at the member end where you want the end can.

    End cans are only placed on unsupported frame connections.

  4. Click Primary Member Information on the ribbon.

    The software displays the name, outside diameter, inside diameter, and plate thickness of the selected supporting member.

  5. Select the transverse members, if any, that participate in the can. Transverse members are used in calculating the length of the can.

  6. Click Accept .

  7. If you are placing a Custom End Can type, change the diameter, thickness, computation method, factor, and cone settings on the ribbon to meet your needs. If you are placing a predefined can from the Catalog, these settings are read-only.

  8. Click Finish.