The following advanced opening macros allow you to place asymmetrical openings with two radii and a length. The software positions a two-support opening by dimensions from the first support and centers the opening based on the length between the radii and with respect to the local coordinate system.
|
|
2S AsymOval LxR1xR2 Creates an asymmetrical oval opening with two supports. You can define the length and the radii. |
|
|
2S AsymOval 500x50x30 Creates an asymmetrical oval opening with two supports. The length is fixed at 500 mm, the first radius is fixed at 50 degrees, and the second radius is fixed at 30 degrees. |
