Example - Intergraph Smart Materials - Version 2016 R4 (8.4.0) - Help - Hexagon PPM

Intergraph Smart Materials Classic Help (2016)

PPMProduct
Intergraph Smart Materials
PPMCategory_custom
Help
Version_SPMat
2016 R4 (8.4)

For example, if you want to replace the ‘IN-12’ insulation type with a new insulation type ‘PP-10’ for pipe, create a Search job as described in this chapter.

The picture below shows a BOM position with the INSUL_TYPE attribute.

  1. Open B.20.01 Edit BOM.

  2. Select the start node.

  3. Click Search/Replace .

  4. Create a master job.

  5. Double-click in the Where Condition field to open A.60.06, and create a Where condition as shown below.

  6. Save the Where condition and close A.60.06.

  7. Copy the master job, rename the new job, and fill out the List Search and Replace Attrs block as shown below. Use the LOV to select the attribute.

  8. Select the INSUL_TYPE attribute from the LOV, and fill in the new value PP-10 for the attribute.

  9. Select the Replace and With Position check boxes.

  10. Click Save.

  11. Click Search.

  12. Click Show Result or Replace.

    Screen B.20.01.29 Result Search/Replace opens.

  13. Select a position and click Replace to replace the insulation type for a single position, or click Replace all to apply the change to all selected positions.

    The picture below shows the result for a position.