L.10.04 Process Line List (PLL) Unit Sets - Intergraph Smart Materials - Version 2016 R4 (8.4.0) - Help - Hexagon PPM

Intergraph Smart Materials Classic Help (2016)

PPMProduct
Intergraph Smart Materials
PPMCategory_custom
Help
Version_SPMat
2016 R4 (8.4)

In this screen you can define process line list unit sets.

The main purpose of this screen is to define the template system for the default attributes (for example, nominal size, outside diameter, wall thickness, and so on). If a new line below the process unit is defined in L.20.01, a set of default attributes, which were defined to this process unit in the template, are automatically inserted.

First, sets of process units are built. For each process unit set, choose unlimited predefined process units L.10.03. Each process unit must only be assigned to one process unit set.

Define the existing attributes [from the A.50.01 screen] or enter new attributes manually in the Unit Set Attributes block. Unknown attributes are created.

If a new attribute is inserted and the unit of measure field is empty, the attribute type and the unit of measure are filled with the project default data defined in A.20.11, A.20.12 or A.20.13 screens (parameter codes according to ZX_ATR_TYP and ZB_UNIT_ID).

When entering an additional attribute in the template system, you should ask yourself if this attribute would be populated to all already existing lines. This question is also true when deleting an attribute from template system. Ask yourself if this attribute will be deleted from all already existing lines.

For each process unit set, chose unlimited predefined process units. Each process unit must only be assigned to one process unit set. Only those units defined in the L.10.03 PLL Units section can be assigned. You can use the LOV functionality to make the selection(s).

If a new attribute is inserted and the unit of measure field is empty, the attribute type and the unit of measure are filled with the project default data defined in A.20.11, A.20.12 or A.20.13 screens (parameter codes according to ZX_ATR_TYP and ZB_UNIT_ID).

When assigning attributes, you must enter a sequence number. This establishes the display sequence of variable position attributes in the PLL screens. Once an attribute is owned by a discipline, only this discipline can modify the attribute.