Sketch and Constrain Bracket Geometry with Corner Cutout - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)
Version_SPEM_custom
9.0.0
Version_SSK
10.0(2018)

If a corner cutout is needed on a bracket, the output geometry must connect to form a closed shape. This closed shape is then trimmed or constrained by the support input curves. Otherwise, geometry creation is similar to other brackets. For more information, see Sketch and Constrain Bracket Geometry.