Add Symbol Data to the Catalog - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)
Version_SPEM_custom
9.0.0
Version_SSK
10.0(2018)
  1. Create a backup copy of the [Product Folder]\CatalogData\BulkLoad\DataFiles\StructCrossSections-AISC-LRFD-3.1.xls workbook.

  2. Verify that the StructCrossSections-AISC-LRFD-3.1.xls workbook is not read-only.

  3. On the Cross Section Symbols toolbar, click Add to Catalog .

  4. Select the Feature File tab.

  5. Select the [Product Folder]\CatalogData\BulkLoad\DataFiles\StructCrossSections-AISC-LRFD-3.1.xls workbook for the Catalog file name box.

  6. Select the Parameters tab.

  7. Verify an Attribute Name for each symbol parameter.

    Do not click Apply until all attribute names have been verified or entered.

  8. Click Apply to add the symbol part class and attribute names to the workbook.

  9. Click OK.

  • The attribute names can be any alphanumeric name without spaces, but are best defined using the same standards as symbol parameters.

  • Close the StructCrossSections-AISC-LRFD-3.1.xls workbook if it is open before clicking Apply or OK on the Add To Catalog dialog box. If the workbook is open, the software displays a message telling you to close the workbook.