Offset Command - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)
Version_SPEM_custom
9.0.0
Version_SSK
10.0(2018)

 Draws an offset copy of an element or a set of contiguous elements. This command copies elements while maintaining characteristics such as the angle of lines and the center point of arcs and circles.

Offset copies the original element at a specified distance. Offsetting outside the perimeter of the original element creates a larger element. Offsetting inside the perimeter of the original element creates a smaller element.

Elements are transitioned as necessary during the offset operation.

See Also

Offset Ribbon
Offset Elements