Connector Command - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)
Version_SPEM_custom
9.0.0
Version_SSK
10.0(2018)

 Connects two elements together.

Using a connector, you can connect to an element by connecting to:

  • Key points. Hollow gray circles indicate potential key points (such as endpoint, midpoint, and others) on an element, when the element is located by the pointer.

  • Connect points. Hollow red circles indicate potential connect points on a symbol.

  • Any point on an element. A solid red filled circle is displayed when the pointer locates an element at a point other than its key points.

  • You must click the Connector command before you see the points for connecting on the element.

  • You can also access this command on the Schematic toolbar.

See Also

Drawing Connectors
Place a Connector
Connector Ribbon