Type U Assembly - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Assemblies

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

Toggle Connection to Feature

Cycles through the available attachment types based on the feature and the support type.

Route Connection 1

Route Connection 2

Route Connection 3

Route Connection 4

Toggle Connection to Structure

Cycles through the available attachment types based on the supporting structure and the support type.

Structure Connection 1

Structure Connection 2

The following scenarios provide some examples of placing this assembly:

Place By Structure

  1. Select the pipe.

  2. Select the steel. The steel can be a beam, column, stiffener, reinforcing edge, and so on.

Placed on Sloped Steel

Perpendicular to Pipe

Perpendicular to Structure

Placed on Sloped Pipe

Perpendicular to Pipe

Perpendicular to Structure

Placed on a Reinforcing Edge

Placed on a Column

Place By Point

  1. Select the pipe

  2. Select the steel. The steel can be either two beams, two columns, two stiffeners, on slab, deck, or wall and one beam, column, or stiffener, or two slabs, decks, bulkheads, or walls.

  3. Select the location for the support.

Placed on a Slab

Placed with Stiffener as Supporting Structure

The following example uses the overhang option; it adjusts to the supporting steel.

Placed with a Beam and a Slab as Supporting Structure

The following example uses the overhang option; it adjusts to the supporting steel.

Placed with a Corrugated Bulkhead as Supporting Structure

The following example includes a pipe.