Remove correlation with design basis - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
10
Version_SThreeD_Custom
10.1 (2014 R1)

Removes correlation from a 3D model object to a design basis object.

  1. Select SmartPlant > Remove Correlation with Design Basis.

    The software prompts you to select correlated objects.

  2. Select objects using fence selection commands, Inside Fence . and Overlapping Fence .

    OR

  3. Click Finish.

    The Remove correlation with Design Basis command filters the correlated objects from the selected 3D objects and un-correlates the correlated objects. The software displays the un-correlation status and the number of objects uncorrelated on the status bar.