Create an arc pipe run - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
10
Version_SThreeD_Custom
10.1 (2014 R1)
  1. Click Route Pipe on the vertical toolbar.

  2. Click Arc Routing on the horizontal ribbon.

  3. Click Start Point and click to set the run starting point.

  4. On the New Pipe Run dialog box, type a name for the Pipe Run. If you do not type a name, the software automatically generates a name.

    Select pipe run settings

  5. Click OK to close the New Pipe Run dialog box.

    If you are connecting the arc pipe to an existing run, select its name from the Run box.

  6. Type the Arc radius in the corresponding box.

  7. Click Center Point , and click to set the run center point.

  8. Click End Point , and click to set the run end point.

  9. Type the Arc angle in the corresponding box.

  10. Click Finish to place the arc pipe.