Place components while routing pipes - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Intergraph Smart 3D
10.1 (2014 R1)
  1. Click Route Pipe on the vertical toolbar.

  2. Select the run starting point.

    • If you select a feature located at the end of an existing run, the software continues the run of the selected feature. Skip to step 5.

    • If you select an equipment nozzle, a point in space, or a point along a straight feature, the software prompts you to create a new pipe run.

  3. On the New Pipe Run dialog box, type a name for the Pipe Run. If you do not type a name, the software automatically generates a name.

  4. Specify the pipe run settings. For more information, see Select pipe run settings.

  5. Click OK to close the New Pipe Run dialog box.

  6. Select points to begin routing your pipe run.

  7. Click Insert Component when you want to insert a component.

  8. Place the component. For more information, see Insert a component.

  9. Select the ending point of the pipe run. Right-click to end a pipe run.

You can continue routing an existing run by selecting a run end feature or by selecting the run name from the list of available runs.