General Tab (Pipeline System Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
10.1(2014R1)

Displays and defines the general properties of the selected pipeline.

Name

Specifies the name of the pipeline. This name is usually generated by the active name rule. You can type a different name for the pipeline if you want. The name must be unique throughout the life cycle of the plant.

Name rule

Specifies the name rule used to generate the name. Set this option to User Defined if you want to specify the name yourself.

Type

Displays the type of object. On the Pipeline Properties dialog box, the type is Pipeline System.

Parent System

Displays the system to which the pipeline belongs. You can change the parent system of the pipeline if needed.

Description

Type a general description of the pipeline.

Sequence Number

Specifies the identification number Smart 3D assigned to the selected pipeline system when it was created. This option is only available when you view the properties of a pipeline system.

Fluid Requirement

Specifies the fluid requirement for the pipeline system. To change the options on the list, edit the Fluid Code select list in Catalog. This option is only available when you view the properties of a pipeline system.

Fluid Type

Specifies the fluid type for the selected pipeline system. To change the options on the list, edit the Fluid Code select list in Catalog. This option is only available when you view the properties of a pipeline system.

Correlation Status

Specifies whether the object has been correlated to an object in a P&ID. The list is defined by the EFWCorrelationStatus select list.

Correlation Basis

Specifies whether the object is correlated to a P&ID object. The list is defined by the EFWCorrelationBasis select list.

  • Correlate Object indicates that the object has a correlating object in a P&ID.

  • No correlation is required indicates that the object does not have a correlating object in a P&ID.

Correlation Approval Status

Specifies whether the object is approved with discrepancies in the three-dimensional data compared with design basis data. The list is defined by the EFWCorrelationApprovalStatus sheet in the AllCodelist workbook.

  • Topology mismatch approved indicates that the object topology mismatch can be ignored.

  • Data and Topology mismatches approved indicates that the object data and topology mismatches can be ignored.

  • None indicates that you do not approve a mismatch.

See Also

Pipeline System Properties Dialog Box