Route a pipe to place a reducer - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.x(2018)
  1. Locate the reducer.

  2. Click Route Pipe on the vertical toolbar, and then press CTRL+SHIFT to select a point cloud point.

    The software displays the compute graphic of the pipe.

  3. Press CTRL+SHIFT to select another point cloud point near to reducer where the pipe run size changes.

    The New Pipe Run properties dialog box is displayed with new diameter of the pipe run.

  4. Modify the diameter of the pipe as necessary.

  5. Click OK.

    The reducer component is placed.

  6. Continue routing.

You might need to manually move the reducer to adjust its position depending on your selection of the point. The software places the reducer at the exact position if you select a point near to the reducer.