Modify Pipe Part Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.x(2018)

Displays options for editing the selected object. This ribbon displays when you set the Locate Filter to Piping Parts, and select a part in the model.

Properties

Displays the properties dialog box for the selected object.

Run

Displays the name of the pipe run with which the selected object is associated. You cannot change the run.

Type

Displays the short code associated with the selected object. The Type list also contains the short codes associated with any other objects defined in the piping specification for the current nominal diameter. Selecting an entry from the Type list replaces the selected object with one of a different type.

This option is read-only for generic piping component.

Option

Displays the option of the selected object. The Option list also contains any options defined in the piping specification for the short code selected in the Type box. For example, if two different wall thickness values are available in the piping specification for the short code selected in the Type box, both options appear in this list. Selecting another entry from the Option list updates the object accordingly.

This option is read-only for generic piping component.

Name

Specifies the object name. You can type a new name if needed.

This option is read-only for generic piping component.

Tag

Specifies the engineering tag for the object.

This option is read-only for generic piping component.

Base/Mating Part

Displays whether the selected object is a base part or a mating part. If the object is a mating part, you can use this option to change the object to a base part. Use caution however, because after a mating part has been changed to a base part, it cannot be changed back to a mating part again.

This option is read-only for generic piping component.