Flange Thickness is less than zero and Nozzle Length is less than Flange Radius. Nozzle graphics cannot be computed. Set Flange Thickness greater than zero and Nozzle Length greater than Flange Radius. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Administration
Version_S3D
12.x(2018)

Flange Thickness is less than zero and Nozzle Length is less than Flange Radius. Nozzle graphics cannot be computed. Set Flange Thickness greater than zero and Nozzle Length greater than Flange Radius. (Equipment)

Meaning: The Flange Thickness value is less than zero, and the Nozzle Length value is less than the Flange Radius value. Because of this, Smart 3D cannot generate the nozzle graphics.

Recovery: Edit the values to ensure that the Flange Thickness is greater than zero and the Nozzle Length value is greater than the Flange Radius value.