Closed tubular plates are not manufacturable. The tube must be split by at least two axial seams. (Molded Form) - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Administration
Version_S3D
12.x(2018)

Closed tubular plates are not manufacturable. The tube must be split by at least two axial seams. (Molded Form)

Object Type in the To Do List: Tubular plate system.

Meaning: A root plate system can be defined as a tube but a single plate part cannot be manufactured in the shape of a tube. At least two axial seams must split the plate system.

Recovery: Verify that the seams exist. If they do not, split the plate with a minimum of two seams that are along the longitudinal axis of the plate.

Seams in close proximity can cause trim errors on the plate parts. Adjust the seams if necessary.