Sets options for placing a support in the model.
Opens the Support Properties dialog box that is used to modify support properties before placement. Edits to the default support properties before the placement are available until you change the inputs, the support type, or exit the command. This allows you to place multiple supports with the edited properties. The next time you start the command, the default support properties from the Catalog are used. For more information, see Support Properties Dialog Box.
Custom Form Definition
Opens the user defined form for an object that has a form defined. It is enabled only if a form definition is defined for the support being placed. If the support does not have the form defined, this command is not available. For more information, see User-defined Forms.
Select one or more features for which you want to place a support. You must select at least one feature. Click Reject to clear all the selected features and start selecting the features again. Click Accept when you are finished selecting the features.
The first feature that you select is the primary feature. The system uses the cross section from the primary feature to define the support plane. If you clear the primary feature, the second feature that you select becomes the new primary feature.
Select one or more structures to support the feature you selected. Click Reject to clear all selected structures and start selecting supporting structures. Click Accept when you are finished selecting supporting structures.
Specify the location of the support on the primary feature. This option is available only when using the Place Support by Point command.
Places the support using the information that you provided.
Clears all the selected objects and restarts the selection process.
Indicates that the object selection is complete.
Select the parent system for the support that you are placing. You can create systems in the Systems and Specifications task.
For pipe supports, the default system is the parent system of the pipe you selected first. For other disciplines, the default system is the last used system.
Displays the support types based on the rules defined in the reference data. When you select this option, the software uses an Assembly Selection Rule to filter the available supports in the Type box based on inputs such as the pipe outside diameter, distance between the supported object and the supporting object, and whether the route is above or below the supporting object. You or your project administrator have control over how the rules are defined. See the Hangers and Supports Reference Data Guide for more information. Clear the Rule option to select any available support type from the catalog.
If you placed a support using the Rule option, and later the inputs to the Assembly Selection Rule (ASR) change, the software changes the support type to a new type if the selected support no longer satisfies the ASR.
Sets the kind of support that you want to place. If you select the Rule option, the software lists support types based on the rules defined in the reference data. If you clear the Rule option, the software lists the last ten support types that you placed. Select More to select a different support type.
When you place a designed support, the Type box is not available.
Change Support Configuration
Cycles through the available attachment types based on the feature and the support type. This option is not available for types that do not support multiple attachment types.
Toggle Connection to Structure
Cycles through the available attachment types based on the supporting structure and the support type. If you are placing a support from two structures, the software displays two buttons, one for each structure. This option is not available for types that do not support multiple attachment types.
Toggle Face Position
Cycles through the available face positions for the supporting structure. For example, you can use this option to move a U-bolt so that it does not interfere with the web of a wide flange beam. If you are placing a support from two structures, the software displays two buttons, one for each structure. This option might not be available if there are no optional face positions.
Specifies the number of copies to create along the feature length. Select the Tools > Point Along command to use this option. Type the distance between supports in the Distance box on the Point Along ribbon. The default value is 1.
This option is available only when using Place Support by Point .
Places a design support. When you start the placement command, select the Design check box to place a design support. Clear the Design check box to place a Standard assembly. You can select or clear the Design check box any time when the Straight Feature SmartStep is active. You can even select or clear the check box after committing the feature selection using Accept . If you select Design, the Rule check box is disabled.
A design support is a placeholder support or a container support to place parts of multiple combinations of standard supports.
The parts you can use to create a design support are available in the catalog. These parts are intelligent and contain property information that enables you to generate reports for the entire support.