Rotate Tab (Edit File Position Dialog Box) - Intergraph Smart Review - Help

Intergraph Smart Review Help

PPMProduct
Intergraph Smart Review
PPMCategory_custom
Help
SPFVersion_custom
2018 R1 (7.1)
Version_SPR
13.x(2018)

Specifies the reference origin coordinates for the point around which the current model rotates. This tab also allows you to specify the plan, front, and side angles, in degrees from 0 to less than 360, for rotating the model.

Reference origin

North

Specifies the north coordinate for the reference origin point around which the model rotates.

East

Specifies the east coordinate for the reference origin point around which the model rotates.

Elevation

Specifies the elevation coordinate for the reference origin point around which the model rotates.

Pick Point

Specifies a 3D point in the model for the reference origin rather than specifying each coordinate individually. Pick the Reference Origin before you transform the model position. For more information, see Placing 3D Points.

The reference origin is adjusted internally by the move deltas specified on the Move tab before the rotate angles are applied.

Angles in degrees from 0 to less than 360

Plan

Specifies the angle in the plan direction to rotate the model.

Front

Specifies the angle in the front direction to rotate the model.

Side

Specifies the angle in the side direction to rotate the model.