Zoom In - Intergraph Smart Review - Help

Intergraph Smart Review Help

Intergraph Smart Review
2018 R1 (7.1)

View > Zoom > In

Zooms into the model by a zoom factor that you specify. Smart Review multiplies the zoom factor that you specify using View > Zoom > Amount by the distance between the current eye and center points.

  1. Click in the view to zoom in (if that view is not already active).

  2. Click View > Zoom > In.

  3. To change the zoom factor, select View > Zoom > Amount and type in the required factor between 1.0 (least) and 50 (greatest).

  • Use this command in any view, but note that if you use the Main view, the eye point and center point positions are affected.

  • Each time that you zoom in, you increase the detail by the current zoom factor. For example, if the zoom factor is 1.5, the detail increases by 1.5 each time that you zoom in. For more information, see Set Zoom Amount.

  • You can change the perspective angle of the Main view to produce zoom effects without changing the eye point position.

See Also

Fit Views
Zoom Out