Mirror orthogonal pipe - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart Isometrics
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_IConfig
6.0(2016)
Version_ISOGEN
13.0(2016)
Version_SPIso
7.0(2019)
Version_SPSplgn
9.0(2019)
  1. Route a pipeline like the one shown below.

  2. Click Edit > Select > Select All to select all the components of the pipeline. Alternatively, create a select set. For more information, read Selection techniques.

  3. Click Cut to remove the original selection from the sketch when you paste the copy in a different location, or click Copy . to retain the original selection in the sketch when you paste the copy in a different location.

  4. Click Paste .

    The software displays a representation of the pipeline selection and the rotation axis in black and white.

  5. Press the SPACE BAR.

    The software displays the pipeline representation around the E/W axis.

  6. Click once in the Detail window to place the mirrored pipeline.

The software always mirrors the selection around the E/W axis. If you need to mirror around the N/S axis, you must use a combination of the mirror and the rotate functionality. First, rotate the original pipeline 180-degrees, and then mirror the resulting pipeline about the E/W axis, which is the equivalent to mirroring about the N/S axis of the original pipeline.