The following attributes are common for all pipelines:
Displays the name of the pipeline. By default, the software sets the pipeline reference for the first pipeline to P-1, the second pipeline to P-2, and so on. If you type a new name, the software also displays the name in the Pipeline Reference box. If you type a new name for a single, non-system POD, the change cascades up the tree and changes both the pipeline and the POD accordingly.
Specify the difference (offset) between the global origin and the model origin in XYZ coordinates.
The pipeline attributes that display in the Properties window and the ability to edit those attributes is controlled by I-Configure. For more information, see Project Defaults and Attributes in the I-Configure Help.
Alt Design Pressure
Specifies the alternative design pressure for the pipeline.
Alt Design Temperature
Specifies the alternative design temperature for the pipeline.
Identifies a section of the plant or project to which the selected pipeline belongs. Batch and Area are used interchangeably.
Indicates the cleaning procedure to use after testing.
Specifies the construction status of the equipment, such as new, existing, future, demolish, and so on.
Construction Work Package
Specifies the construction work package to which the pipeline is assigned.
Indicates the date associated with the pipeline.
Specifies the pipeline design code.
Specifies the allowable design pressure.
Specifies the allowable design temperature.
Engineering Work Package
Specifies the engineering work package to which the pipeline is assigned.
Indicates the type of fluid intended to flow through the pipeline.
Specifies the fluid type for the pipeline.
Specifies the start connection of the pipeline.
Handover Subsystem ID
Specifies a unique identification number for the handover subsystem.
Handover System ID
Specifies a unique identification number for the handover system.
Installation Work Package
Specifies the installation work package to which the pipeline is assigned.
Specifies the default insulation specification reference.
Insulation Spec Number
Specifies the identification code for the insulation specification associated with the pipeline.
Specifies the width of the insulation from the internal surface of the pipeline to the external surface.
Specifies the default jacket specification reference.
Specifies a unique identification code for the pipeline.
Main Nominal Size
Specifies the diameter of the main segment of the pipeline.
Material of Construction
Specifies the pipeline material of construction.
Misc Spec (1-5)
Provides for up to five miscellaneous specification references that can hold additional, arbitrary data.
Specifies the non-destructive test required for the pipeline.
Identifies the pipeline design class.
Identifies the pressure rating of the pipeline.
Specifies the maximum operating pressure of the pipeline.
Specifies the maximum operating temperature of the pipeline.
Defines the coating type for the pipeline.
Specifies the default painting specification reference.
PID Drawing Number
Specifies the P&ID drawing number from which the pipeline originates.
Identifies the P&ID revision index.
Displays the default piping specification reference. This information is read-only.
Pipeline Attribute 0-199
Provides up to 200 user-specified general-purpose pipeline attributes that can be output in reports or plotted on isometric drawings.
Specifies the name of the pipeline. If you type a new name, the software also displays the name in the Name box.
Specifies the design or operating temperature for the pipeline.
Indicates the pipeline construction.
Procurement Work Package
Specifies the procurement work package to which the pipeline is assigned.
Specifies the project number or name.
Specifies the post weld heat treatment requirement for the pipeline.
Indicates whether there is a single isometric re-plot request. If you select True, the re-plot request is enabled. If you select False, the re-plot is disabled.
Specifies the revision identifier of the pipeline.
Identifies an additional number used in situations where a third-party system, such as the Fabrication shop control system, automatically assigns a sequence number to the processed pipeline.
Specifies the specific gravity of pipeline contents.
Specifies the prefix that Isogen uses on spool identifiers.
Spool Naming Rule
Indicates the text string that specifies the spool prefix, type of identifier (alpha or numeric), and the length of the spool identifier.
Identifies the category for stress calculation.
Identifies the name assigned to the group of pipelines (package) that require stress analysis.
Support Weld Prefix (Erec)
Specifies the prefix string that the software uses for the identification of all erection pipe support welds.
Support Weld Prefix (Fab)
Specifies the prefix string that the software uses for the identification of all fabrication pipe support welds.
Support Weld Prefix (Offs)
Specifies the prefix string that the software uses for the identification of all offshore pipe support welds.
Identifies the type of fluid to use for the pipeline pressure test.
Specifies the pressure to use for testing the pipeline for leaks or other failure..
Specifies the end connection of the pipeline.
Indicates whether the pipeline requires heat testing.
Specifies the default tracing specification reference.
Weld Prefix (General)
Specifies the prefix string that the software uses for the identification of all welds.
Weld Prefix (Fab)
Specifies the prefix string that the software uses for the identification of all fabrication welds.
Weld Prefix (Erec)
Specifies the prefix string that the software uses for the identification of all erection welds.
Weld Prefix (Offs)
Specifies the prefix string that the software uses for the identification of all offshore welds.